Why spend time and money frequently re-cleaning moldy surfaces? Most mold products, including bleach, do not kill the roots embedded in porous surfaces. And to make matters worse, what little protection they do offer gets rinsed away when surfaces are first exposed to water or condensation.

One application of Endurance BioBarrier Mold Prevention Spray invisibly protects through hundreds of wet-dry cycles on any indoor or outdoor surface. Depending on the surface location, this means you’ll be preventing the growth of mold, mildew, germs and musty odors anywhere from 6 months to 25 years. This will save you lots of time and money. To make it even more economical, it covers more than double the surface area of top competitors.

No bleach. No triclosan. No harmful fumes (zero VOCs).

Our Endurance BioBarrier Mold Prevention product was certified as non-toxic by the leading toxicologist at the Duke University School of Medicine. So rest assured that it is completely safe for people, pets, plants and the environment.

Plus, you don’t need to invest in expensive HAZMAT gear or vacate your home during application.

Use our EBB Cleaner Prep to clean up mold. Then use our EBB Mold Prevention Spray for the safest, longest lasting protection against mold, mildew, germs and musty odors.

Guaranteed to significantly outlast competitors when applied per simple directions.

Up to 6 months in high-traffic areas such as bathrooms, kitchens and locker rooms. Up to 2 years on exposed indoor or outdoor surfaces such as ceilings, walls, stucco, siding, roofing, gutters, concrete, bricks and more. Up to 25 years on enclosed surfaces such as attics, crawl spaces and stud cavities.

The innovative formula in our Mold Prevention Spray uses a microscopic polymer to bind a proprietary blend of EPA registered biocides to any surface, thus preventing those biocides from being easily rinsed away.

This high-tech polymer barrier has pores that open in wet conditions and then close in dry conditions, allowing just the right amount of biocides to be exposed to fight mold, mildew and germs. This rations and prolongs the life of the biocides, helping them to remain effective through hundreds of wet-dry cycles, significantly outlasting all competitors.

Application is a simple process, especially since EBB is non-toxic and thus you don’t need expensive protective gear.

First, for best results remove visible mold, dirt and grime using Endurance BioBarrier Cleaner Prep or a non-bleach cleaning product.

Then lightly apply our Endurance BioBarrier Mold Prevention spray using a hand pump sprayer, airless sprayer or fogger.  Then let air dry for about an hour.

Not sure if you covered all surfaces properly? Just shine a UV black light on the surfaces. Surfaces properly coated with our Prevention product will glow. A convenient bonus feature!

No need to wait for surfaces to be completely dry before applying Endurance BioBarrier Mold Prevention.

This can be a big time saver. As soon as you’re done removing mold and grime with our Cleaner Prep or any non-bleach product, go ahead and spray Endurance BioBarrier on the damp target surface.

If you’re a plumber or DIY homeowner fixing a water leak behind a wall, you don’t need to wait for the studs to get dry. You can immediately spray damp studs, insulation and drywall with our Endurance BioBarrier Mold Prevention Spray.

Effective on all indoor surfaces. Tile, grout, drywall, ceilings, baseboards, window frames, insulation, carpets, upholstery, paneling, ceiling tiles, washing machines, closets, bathrooms, basements, attics, crawl spaces, even entire rooms can be sprayed with Endurance BioBarrier to prevent mold, germs and musty odors.

For best results, whenever possible you should first remove visible mold, dirt and grime with our Cleaner Prep or any non-bleach product. Then apply our Endurance BioBarrier Mold Prevention Spray.

However, please note that our products should not be used as a substitute for professional mold remediation on badly damaged moldy surfaces. Just be sure to ask your remediation or restoration contractor to use our products so you can get our long lasting guarantee.

Wood, cement, brick, stone, tiles, grout, mortar, stucco, metal, glass, plastic, roofing, vinyl siding, gutters, eaves, fences, decks, patio furniture/cushions, garages, cars, boats, RVs, and anything else you can think of.

For best results, whenever possible you should first remove visible mold, dirt and grime using our EBB Cleaner Prep or any non-bleach product.  If a surface can’t be reached to be cleaned first, then no worries. Just apply our Endurance BioBarrier Mold Prevention Spray and it will eliminate and prevent mold regrowth on any surface it can adhere to.

However, please note that our products should not be used as a substitute for professional mold remediation on badly damaged moldy surfaces. Just be sure to ask your remediation or restoration contractor to use our products so you can get our long lasting guarantee.

Musty odors are caused by microbes. Endurance BioBarrier removes and prevents the regrowth of 99.9% of microbes, significantly outlasting all competitors. Plus it’s non-toxic and safe to spray on any surface.

So feel free to spray wherever you have a problem with musty odors. Upholstery, carpets, curtains, car interiors, RVs, camping tents, closets, storage rooms, and even clothing.

Just lightly spray it on and let air dry for about an hour.

Our EBB Mold Prevention and Cleaner Prep products are available in a Commercial Contractor Grade version in 1 gallon, 5 gallon and larger sizes.

Use a hand pump pressurized sprayer or fogger machine to treat any surface or even an entire room. Remember, EBB is non-toxic so it is safe to apply anywhere you want to remove and prevent the growth of mold, mildew and germs, including on fabrics.

Flood water damage. Locker rooms. Schools. Office and apartment buildings. Hotel rooms. Cruise ships. Airplane seats and carpets. Restaurants. Just about any commercial application where mold, germs and musty odors are a concern. It also prevents dry rot.

For best results, we recommend first using our Endurance BioBarrier Mold & Grime Cleaner Prep to remove mold, dirt, grease and grime.

After removing mold and grime, keep your surface free of mold, mildew and germs for the longest time possible by applying Endurance BioBarrier Mold Prevention Spray.

Our Cleaner Prep is water based, so it’s safe to use on all surfaces. Just like our Endurance Bio Barrier Mold Prevention product.

Our Endurance BioBarrier Mold Prevention product is formulated to prevent the growth of ALL microbes, not just mold and mildew.

So after you’re done spraying it on surfaces where you want to prevent the growth of mold, go ahead and spray it on surfaces where you want to prevent the growth of germs.

Faucet handles, doorknobs, drawer handles, counter tops, desks, remote controls, bedspreads, cabinets, floors, upholstery, etc. It’s non-toxic. So go for it!

Our active ingredients include a proprietary blend of antimicrobial/biocides that are EPA/TSCA registered to eliminate 99.9% of mold, mildew and germs within 48 hours.

American jobs. American quality. That says it all.