How To Apply Our Mold Prevention Spray In Large Areas
Non-toxic. Zero VOCs. Tips to improve results for residential or commercial mold prevention.
This article and video briefly describe how to apply our long lasting mold preventative in large areas. It’s a simple process. And remember, it provides the longest lasting protection against mildew, germs, and musty odors too.
Certified mold remediation and restoration contractors should visit our webpage offering details on how and where to apply.
First of all, since Endurance BioBarrier Mold Prevention Spray is certified non-toxic with no harmful fumes, you don’t need to spend time and money investing in expensive protective gear when applying. But to be extra cautious, we do recommend using a simple dust mask and rubber gloves for large applications.
Here are examples of areas where our Mold Prevention Spray can be applied to inhibit mold, mildew, germs and musty odors.
Attics, basements, crawl spaces, closets, floors.
Entire bathrooms, especially tile grout.
Carpets, upholstery, canvas.
Vinyl or wood siding and eaves.
Roofing of all types, plus gutters.
Wood, vinyl, brick, stone, stucco, fences.
Boats, yachts, RV’s.
Tiled patios, patio furniture, patio furniture upholstery.
Commercial applications such as locker rooms, laundromats, entire hotel rooms, public bathrooms, cruise ships, daycare centers, schools, offices, you name it!
For large application areas we recommend using an airless hand pump sprayer. You can also use a fogger machine. A fine mist nozzle is best for the hand pump sprayer, but a heavier setting is best for a fog machine to ensure a proper coating of all surfaces. Be sure to flush the sprayer or fogger nozzle with fresh water when finished.
It’s a smart idea to wear latex gloves and at least an N95 dust mask whenever using a misting sprayer or fogger.
Here are some application tips.
Before applying, be sure to fix any leaking or standing water problems.
Also, for best results, whenever possible we recommend that you first clean away visible dirt, grime or mold using Endurance BioBarrier Mold & Grime Cleaner Prep or your favorite non-bleach cleaning product.
As an added benefit that saves valuable time, you don’t need to wait for surfaces to be completely dry after repairs or cleaning, before applying Endurance BioBarrier Mold Prevention Spray.
When applying, mist all surfaces just enough to become slightly damp.
If you overspray, gently dab up excess product that may form into pools.
Allow to air dry.
If desired, to ensure that all surfaces have been properly coated, scan them with a black light. Protected surfaces will glow. Yet another unique, added benefit exclusively offered by Endurance BioBarrier.
Finally, when finished, be sure to flush the sprayer nozzle with fresh water to prevent clogging.
Rest assured that Endurance BioBarrier will significantly outlast all competitors in the prevention of mold, mildew and germ regrowth.
We guarantee it.
Don’t you want this kind of non-toxic, long-lasting mold, mildew and germ protection for your home and family?
Note: Active ingredients include proprietary blend of antimicrobial/biocides that are EPA/TSCA registered to destroy pathogens and are formulated to eliminate mold, mildew and germs within 48 hours. No triclosan. No bleach. Non-toxic. Zero VOCs.